BDM100 V1255

Features:

1. BDM 100 is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with Motorola MPC5xx processor (essential).

2. BDM 100 requires the ECU to be open, "on the bench", as the reading/programming operations are realized by linking a flat cable to specific area the ECU (the tool, on the other side, is linked to the USB port of a computer).

3. BDM 100 allows also to create perfect copies of the whole software of an ECU (after having read the original ECU software).

4. The ECU must be removed from the car and is programmed by special spring contacts without soldering on the circuit board. This method is used for example if a car has no connection from the OBD connector to the ECU or for very new ECU versions. The best tool for this is the BDM 100

5. The software allows to read and program the WHOLE ECU content of:
29BL802 SSOP eprom file (or ROM memory with maps if eprom physically not present);
Motorola MPC5xx Processor file;
Serial Eprom content.
Please note that even in the case of the ECU blocking, due to the wrong checksum recalculation, the ECU can always be reprogrammed and then retrieved (if the original software has been previously stored).

Package includes:
BDM100 Interface.
ECU connecting cable with 3 adapters.
USB connecting cable.
12V Power Supply.