Basic Info.
Model NO.
for TOYOTA Smart Key
Update Method
by Internet
Application
for Key Programer
Delivery
Fast and Convenient
Transport Package
We Can Pacakage According to Your Requirment
Product Description
Smart Key Maker 4c/4D for Toyota OBD2 EOBD Transponder Key Programmer
The detailed operating steps are as following:
Common Keys
1.Turn the ignition switch "ON" using the key with the orginal 4D chip.
2. Insert the key programmer to the car diagnostic interface OBD, and the instrument will enter into the procedure of car auto searching with a short sound of "di". 7 seconds later, the key programmer connect with the car computer successfully with the short sound of two or three "di"(two means the car is belong to the second generation and the three means third generation.); After 20 seconds, the instrument will enter into the "learning key procedure" with a long sound of "di".
3. Reading the key code
3.1.Match two main keys and one subsidiary key to the IMMO computer(attention: There must be two new main keys and one subsidiary key)
a) Insert the first new key into the ignition lock and wait for 5 seconds,and then the SEC light turns on.(Don't turn on the ingntion when the key is inserted.)
b) Insert another main key into the ignition lock and wait for 5 seconds, and then the SEC light turns on.(Don't turn on the ingntion when the key is inserted.)
c) Insert the subsidiary key into the ignition lock and then the SEC light turns off. (Don't turn on the ingntion when the key is inserted.)
3.2.Only match one or two main keys to the immo computer ( Close the matching mode manually after the matching finished.)
a) Insert the first main key and wait for 5 seconds, SEC light turns on. (Don't turn on the ingntion when the key is inserted.)
b)Insert the second main key and wait for 5 seconds, SEC light turns on. (Don't turn on the ingntion when the key is inserted.)
c)Insert the first finished key, turn on the ignition quickly for 5 times and then take out.
Smart Keys
1.Safe and efficient: Only need 20 seconds to add one key
2.It is safe for the security alarm system
3.Support all kinds of Toyota and Lexus smart key system: support K line and CAN-BUS protocols
4.It is the most safe and fast key programmer device for Toyota and Lexus series till now.
5.It supports all key lost
Using the smart key
1. Add the other keys into the main key
1.1..Insert the key programmer to the car diagnostic interface OBD, and the instrument will enter into the procedure of car auto searching with a short sound of "di".
1.2.Push the start-button twice. After 7 seconds the vehicle will connect the devices successfully, and the equipment will send off a sound of "di" with 4-5 times, (4 sounds mean that the system is the 4th period, 5 sounds mean that the system is the 5th period); after waiting for 30 seconds the equipment will send off a long soung of"di", it means the car enter into "learning key state."
2. When lost all keys or only have the deputy key, we need to do it initialize:
2.1.Hold down the LED button on the equipment, and insert it into the OBD, and release the button after the sound of "di" twice,the device enter into the state of search vehicles in this time. :
2.2..Push the start-button twice. After 7 seconds the vehicle will connect the devices successfully, and the equipment will send off a sound of "di" with 4-5 times, (4 sounds mean that the system is the 4th period, 5 sounds mean that the system is the 5th period); after 5 seconds the lights of SEC will be off; after waiting for 10-16 minutes the equipment will send off a long sound of "di", and the SEC lights flashing, that means the car enter into "learning key state."
3. Learning the intelligent key to the anti-theft of computer:
When the sign back of the intelligent keys near the launch button, will hear 2 sounds of "di" "di" at this time, the SEC lights will flash twice;after learning all the intelligent keys, it have to wait for 30 seconds until the SEC lights flash,and the system will close the learning pattern automatic.
Lexia-3 Citroen/Peugeot Diagnostic Tool
Features:
1. Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.
2. This diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models.
3. It is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001)
Functions
1. Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool.
2. It contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
3. Read identification
4. Displays complete identification of control unit, e. G. Part number, software/hardware version, manufacturer, etc...
5. Read fault codes
6. Displays all stored and pending fault codes with complete description (e. G. "Rail pressure - too low pressure").
7. Program supports report printing or copy to clipboard.
8. Clear fault codes
9. This function clears all stored fault codes and other diagnostic information.
10. Auto-scan (complete car scan/test)
11. Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
12. Measured Values
13. Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
14. Actuator test
15. Actuator test activates particular actuator (e. G. Turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc...)
16. Programming functions/Adaptation
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC
Our Service
1) Your inquiry related to our product and prices will be replied in 24 hours
2) OEM / ODM orders are accepted. We have the capacity to develop new model designing and tooling based on customer's needs.
3) Sample is available, but sample fee and shipping cost need to be paid
4) We help our customers in different channels such as consumer electronics brands, office supplies buyers, Retailers, Distributors as well as Gift and Premium companies to increase their sales and improve their margins with flawless delivery of the ordered products.
5) We are looking business partnership to share visions, business-value, long term growth and profitability for both parties.
6) Payment terms: bank transfer, PayPal, western union, Money Gram; if there is no payment method you want as above, please contact us at any time.
Contact US:
8:00Am to 23:00PM Monday to Saturday online service.
Other times please send email to customer service or leave message on skype. You'll get reply within 24hours.
Website:autodiagtechnology.en.made-in-china.com |
Address:
5 Floor, Zone. D, Canbo Industry Park, Mudun, Guangming New District, Shenzhen, Guangdong
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Electrical & Electronics
Company Introduction:
ShenZhen Autodiag Technology Co., Ltd was established in 2004, Specialized in Auto diagnostic Products more than 10 years.
Our factory is SGS certificated factory, we have professional technicians R&D Team which is rare in the whole industry, he annual production output was more than 1 million items which 30% are new products. We have our own brand V-Checker and we are able to do OEM or ODM. More importantly, We have very strict quality control system. From very strict factory QE Process to Authority products certificate, SGS, CE, RoHS and UL Tests, Meanwhile, We have very good cooperation with Launch, Autel and YanHua, we are authorized dealer of these brands.
We have 10 years successful foreign trading experience, have build good partnership with clients from 35 different countries, Now we have official distributors in Poland, Germany, Spain, France, UK, Argentina and New Zealand, Clients come to visit every month and we have been to different countries to hold exhibition, Such as Automechanika 2012&2014 in Frankfurt, AAPEX Show in Las Vegas.
Reliable quality products, best price, professional technician& customer service, ability to develop new products, fast and safe delivery, Life long products warranty make us best diagnostic tools factory in Shenzhen, and our goal is be the BEST auto diagnostic factory in China, Be clients′ best supplier in the world!